Ricoh FT4480 Field Service Manual page 166

- REGISTRATION ROLLER REPLACEMENT -
1. Remove the DF cover (4 screws, 2 collars).
2. Remove the indicator board [A] (2 screws).
3. Remove the harness clamp [B] as shown (1 screw).
4. Disconnect the registration solenoid harness [C] and roller release
solenoid harness [D] (2 red connectors).
5. Move the indicator board and the harness bracket [E] (1 screw) away
from the feed-in section.
6. Remove the springs of the friction roller release lever [F] and the
registration clutch lever [G].
7. Remove the solenoid assembly [H] (2 screws).
NOTE: The release solenoid plunger is engaged with the release lever [I].
5-19
15 MARCH 1987