Ricoh FT4480 Field Service Manual page 14

25.
Pull out the drum protective sleeve [A].
NOTE: Save the drum protective sleeve for future use when servicing the copier.
26.
Make sure that the wire cleaner is properly positioned, then reinstall
the drum stay and the charge corona unit.
27.
Remove the paper over the T/S corona unit and return the T/S
corona unit to its original position.
28.
Reinstall the toner collection bottle [B] and plug in the toner overflow
sensor connector [C].
29. Make sure that
underneath the
bottle cover [F]
the hooks of the transport plate [D] are positioned
bottle cover [E], then reinstall the toner collection
(1 screw). Close the cassette tray.
1-9
15 MARCH 1987