Ricoh FT4480 Field Service Manual page 176

15 MARCH 1987
12. Connect the sorter ac harness [A] (free red 2p connector).
Connect the sorter dc harness [B] (CN102, free white 4p connector).
13.
14. Secure the sorter ground wire [C] (1 screw with toothed washer).
15. Turn on DIP SW202-1 on the main board [D].
16. Mount the sorter covers and copier rear cover.
17. Peel off the panel cover [E] at the left end of the operation paneI
[F] .
18. Set the Sort/Stack key top [G] and adhere the Sort/Stack key cover
[H] .
Check the sorter's operation and fill out the New Equipment Condition
19.
Report.
6-4