Copier Installation 1 - Ricoh FT4480 Field Service Manual

- INSTALLATION PROCEDURE -
NOTE: -
The color development unit should be installed after drum conditioning
is finished. (See the copier installation procedure.)
The following procedure should be done when the color developer is
replaced.
1. Install the color actuator [A] on the color development unit (1 screw).
NOTE: Each actuator has a colored sticker. Install the appreciate actuator.
2. Stick the appreciate decal [B] on the development unit handle.
3. Separate the toner tank [C] from the development unit [D] (2 screws).
4. Pour one bottle of color developer [E] into the development unit while
turning the knob [F] counterclockwise to distribute the developer.
1-13
15 MARCH 1987