Ricoh FT4480 Field Service Manual page 16

33. Lower the platen cover.
34. Plug in the machine and turn on the main switch.
35. After the warm up period is completed, enter 99 copies and
the Start Key for drum conditioning.
36. After the machine stops, turn off the main switch.
37. Turn off DIP switch No. 1 - 1 and reinstall the DIP switch cover.
38. Install the operating instruction cards [A] over the DIP Switch
as shown (double-sided tape).
39. Install the original holder [B] on the platen cover as shown and
the receiving tray [C].
40.
Load paper into the cassette and check machine operation and copy
quality.
41. Fill out the New Equipment Condition Report.
1-11
15 MARCH 1987
press
cover
install