Ricoh FT4480 Field Service Manual page 81

15 MARCH 1987
- PICK-OFF PAWL REPLACEMENT -
1. Remove the release spring [A] and the pressure lever [B] (1 screw).
2. Remove the collection coil gear [C] from the the toner collection coil
shaft (1 E-ring).
3. Remove the pawl shaft pin [D] from the pawl shaft [E].
4. Push the pawl shaft to the rear and slide off the cam holder [F] from
the front side plate.
5. Take out the whole pawl shaft assembly.
6. Slide off the cam holder and cam rider [G].
7. Slide off the front pick-off pawl [H] (1 positioning pin [I]) and the
front pawl spring [J] (1 screw).
8. Slide off the rear pick-off pawl (1 positioning pin).
3-30