Ricoh FT4480 Field Service Manual page 121

15 MARCH 1987
7. Hook the tension spring onto the other end of
hook the tension spring onto the front endblock
8. Insert the wire junction [A] of the new separation corona wire through
the hole in the rear endblock and hook the terminal spring onto the
nearby wire junction.
9. Hook the tension spring onto the other end of the loop and then
hook the spring to the front endblock anchor post.
CAUTION: The separation corona wire should be properly positioned on the
grooves of the front and rear endblocks.
Reset the endblock covers and the corona paper guide.
10.
the corona wire. Then
anchor post.
3-70