Ricoh FT4480 Field Service Manual page 105

15 MARCH 1987
6. FUSING
- FUSING UNIT REMOVAL -
1. Open the left and right front doors.
2. Push the fusing unit release lever [A] to the right.
3. Pull out the fusing unit [B] until it is fully extended.
4. Push the fusing unit release lever to the right, move the fusing unit to
the left to disengage the stopper pin [C], and remove the unit from
the copier.
NOTE: Keep the fusing unit in an upright position so that silicone oil does not
spill.
3-54