Ricoh FT4480 Field Service Manual page 97

15 MARCH 1987
- FRICTION PAD REPLACEMENT (CASSETTE TRAY) -
1.
Pull out the cassette tray.
2.
Unhook the pressure spring [A].
3. Remove the friction pad holder [B] (1 screw, 1 collar washer).
4. Strip off the old friction pad [C] and clean the surface of the friction
pad holder.
5. Install the new friction pad.
NOTE: -
-
Do not touch the surface of the new friction pad with oily fingers.
Check that the friction pad is 0.05 to 0.35 millimeters below the
surface of the front lip.
3-46