Ricoh FT4480 Field Service Manual page 95

15 MARCH 1987
- PAPER SIZE SENSOR HARNESS REMOVAL (CASSETTE TRAY) -
1. Pull out the cassette tray.
2. Remove the paper size sensor bracket and disconnect the paper size
sensor connector. (See "Paper Size Sensor Replacement.")
3. Remove the paper guide plate [A] (6 screws).
4. Remove the terminal bracket [B] (1 screw).
5. Remove the terminal [C] (1 screw).
- CASSETTE TRAY FEELER REMOVAL -
1. Pull out the cassette tray.
2. Remove the sensor feeler bracket [D]
3. Remove the sensor feeler pin [E] (1 E-ring) and the sensor feeler [F].
NOTE: When reinstalling the sensor feeler, make sure that the spring [G] is
properly positioned as shown.
3-44