Ricoh FT4480 Field Service Manual page 92

- PAPER END SENSOR REPLACEMENT (CASSETTE TRAY) -
1. Remove the rear cover (2 screws).
2. Remove the PCB plate supporter (1 screw).
3. Remove the 3rd paper feed clutch [A] (1 E-ring).
4. Remove the paper end sensor actuator [B].
5. Replace the paper end sensor [C] (1 screw, 1 connector).
NOTE: When reinstalling the sensor, make sure that the actuator is properly
aligned; do not overtighten the screw.
3-41
15 MARCH 1987