Table of Contents
Advertisement
15 MARCH 1987
- INSTALLATION PROCEDURE -
1.
Remove the strips [A] of tape shown in the figure.
2.
Turn off the main switch and unplug the power supply cord of the
copier.
3.
Remove the receiving tray [B] and rear cover [C] of the copier (2
screws).
4.
Remove the five plastic caps [D] from the left cover.
5.
Remove the sorter covers [E] (2 screws each).
6.
Install the sorter adapter [F]
7.
Connect the sorter adapter
connector).
on the sorter (1 screw).
harness [G] to the sorter (free white 2p
6-2
Advertisement
Chapters
Table of Contents
