Ricoh FT4480 Field Service Manual page 53

15 MARCH 1987
- 2ND MIRROR REMOVAL -
NOTE: This procedure is usually performed in order to make cleaning the 3rd mirror
easier.
1. Turn off the main switch.
2. Remove the exposure glass. (See Exposure Glass Removal.)
3. Move the 1st scanner 2/3 to the right by pushing it at the rear.
4. Remove the front spring plate [A] by pressing the top of the spring
and moving the plate towards the front of the machine.
5. Carefully pull the 2nd mirror [B] towards the front of the machine to
remove the rear spring plate [C].
6. Lift the mirror out of the machine rear side first.
7. Clean mirrors with silicone cloth or water, and then dry.
3-2