Ricoh FT4480 Field Service Manual page 167

15 MARCH 1987
8. Slip off the timing belt [A] while lifting the belt tightener.
9. Remove the registration clutch assembly [B] (1 E-ring).
10. At the front, remove the lever spring [C] and lower the original
entrance guide [D].
11. Remove the registration drive gear [E] (1 E-ring, 1 pin [F]).
NOTE: Do not lose the pin.
12. Remove the registration roller [G] as shown in the figure (1 E-ring, 2
bearings).
5-20