5.3.1 E-mail
After a trigger event, the GV-IP Speed Dome can send an e-mail to a remote user containing a
captured still image.
[Enable] Select to enable the e-mail function.
Sever URL/IP Address: Type the SMTP Server's URL address or IP address.
Server Port: Type the SMTP Server's port number. Or keep the default value 25.
From email address: Type the sender's e-mail address.
Send to: Type the e-mail address(s) you want to send alerts to.
Alerts Interval time in minute: Specify the interval between e-mail alerts. The interval is
configurable between 0 and 60 minutes. Any event triggers during the interval period will
be ignored. This option is useful for events with high occurrence.
[Need authentication to login] If the SMTP Server needs authentication, select this option
and type the valid username and password.
[This server requires a secure connection (SSL)] If the SMTP Server supports the secure
connection SSL, select this option. The option is only available after you select Need
authentication to login.
[Email – Alarm Settings]
You can choose to automatically send the e-mail for alarm under these conditions: motion
detected and digital input triggered.
78
Figure 5-7
Need help?
Do you have a question about the GV-IP Speed and is the answer not in the manual?