Visual Ptz - GeoVision GV-IP Speed User Manual

3.2.13 Visual PTZ

In additional to the PTZ Control Panel, you can display a visual PTZ Control Panel on the
image.
• To access this feature, click the PTZ Control button (No. 9, Figure 3-3) and select Visual
PTZ.
• To change the panel settings, click the green PTZ button on the top left corner. You will
have these options:
[PTZ Control Type]
Type 1: In this mode when you place the mouse arrow on the four directions, i.e.
north, south, east, west, the speed indicator of five levels will appear. Click and hold
on the required level of movement and the camera will move as per the specific
speed.
Type 2: In this mode with the mouse click, the PTZ control panel will appear. The
movement of the camera will depend on the speed of the mouse movement.
[Configure]
Set Color: Changes the color of the panel. Three kinds of colors are available:
Red, Green and Blue.
Transparent Degree: Adjusts the transparency level of the panel. Ten levels range
from 10% (fully transparent) to 100% (fully opaque).
52
Figure 3-14