GeoVision GV-IP Speed User Manual page 94

4. User Name: Type a valid user name to log into VSM.
5. Password: Type a valid password to log into VSM.
6. Click Apply. The Connection Status should display "Connected" and connected time.
These options you can also find on this VSM setting page:
Cease motion detection messages from: Stops notifying VSM of motion detection.
Cease input trigger messages from: Stops notifying VSM of input trigger from selected
input(s).
Stop all notifications from: Stops notifying VSM of all alerts from the selected streams.
Enable schedule mode: Starts the monitoring through VSM based on the schedule you
set in the Select Schedule Time section. Refer to 5.5 Recording Schedule for the same
settings.
For related settings to activate the monitoring through VSM, see 5.1.2 Motion Detection, 5.2.1
Input / Output Settings, and 8.2 VSM.
84