Preset Settings; Cruise Settings - GeoVision GV-IP Speed User Manual

4.1 Preset Settings

Up to 256 presets can be set up.
Setting Up a Preset
1. To set up a preset position, use the direction keys on the PTZ Control Panel to move the
Dome to a desired position in Live View.
2. To save the preset position, click Option (Figure 4-1) on the PTZ Control Panel, click
Preset Set, and select the desired preset number.
3. To create more preset positions, repeat Steps 1 and 2, and select a different preset
number.
Using a Preset
To move the GV-IP Speed Dome to a defined preset position, click Option (Figure 4-1) on the
PTZ Control Panel, click Preset Go, and select a Preset number which has been previously
set.

4.2 Cruise Settings

You can set a route which is made up of different directions, angles, and zooms for the GV-IP
Speed Dome to follow. Up to 4 Cruises can be created.
Setting Up a Cruise Route
1. Click Option (Figure 4-1) on the PTZ Control Panel, click Auto and select Set Cruise 1.
2. Use direction keys and zoom in / out keys to set the desired route path and zoom.
3. When you are finished with setting up a Cruise 1 route, click Option (Figure 4-1), click
Auto and select End Cruise 1.
4. To set up another Cruise route, repeat Steps 1 to 3, and select a different Cruise number.
Starting and Stopping a Cruise Route
To start the GV-IP Speed Dome on a defined Cruise route, click Option (Figure 4-1) on the
PTZ Control Panel, click Auto and select a Go Cruise number which has been previously set.
To stop a Cruise route in action, click on a direction key, home key, zoom button or focus
button on the PTZ Control Panel.
56