4.3 Events & Alerts
The Administrator can set up the following alert methods to receive notifications when motion
is detected or I/O devices are triggered:
1. Send a captured still image by e-mail or FTP.
2. Notify Center Monitoring Station, Center V2, Vital Sign Monitor or GV-GIS, by video or
text alerts.
To activate the above alert methods, you must set the following functions in advance:
•
Motion Detection (See 4.1.2 Motion Detection)
•
Input Setting (See 4.2.1 Input Settings)
•
For e-mail and FTP alerts, it is required to start monitoring (See 4.4 Monitoring).
4.3.1 E-mail
After a trigger event, the camera can send an e-mail to a remote user containing a captured
still image.
Figure 4-13
Administrator Mode
4
97