GeoVision GV-IP Speed User Manual page 114

[Host Settings] Enter a descriptive name for the GV-IP Speed Dome.
[Auto Reboot Setup] Select Enable to activate automatic reboot and specify the time for
reboot in the sub fields below.
Day Interval: Type the day interval between the reboots.
Update time at: Use the drop-down list to specify the time for automatic reboot.
[Firmware Update] This field displays the firmware version of the GV-IP Speed Dome.
[Camera Model Information] This field displays the model name of the GV-IP Speed Dome.
[System Settings] Clicking the Load Default button will make the GV-IP Speed Dome
restore factory default settings.
Note: After applying the default function, you will need to configure the GV-IP Speed
Dome's network setting again.
[Reboot]
Clicking the Reboot button will make the GV-IP Speed Dome perform the software reset.
104