E-Mail - GeoVision GV-TBL Series User Manual

3.2.5 E-mail

After the configuration of E-mail, you will be able to send messages to the specified E-mail
address(s) when alarms are triggered.
Figure 3-11
Note: To send snapshots to the specified E-mail address(s), make sure to enable the
Snapshot function. For more detailed instructions, refer to 3.3.2 Snapshot.
88
1. Type the Name and Address of the
sender.
2. Type the SMTP Server.
3. Type the SMTP Port number.
4. To send the e-mail through TLS /
SSL encryption, enable TLS/SSL.
5. Enable Attach Image to include 3
instant snapshots as attachment in
the e-mail according to the
Snapshot Interval specified.
6. If the SMTP Server needs
authentication, enable Server
Authentication and type a valid
username and password to log in the
SMTP server.
7. Type the name(s) and e-mail
address(s) of the Recipient(s).
8. Click Save.