GeoVision GV-IP Speed User Manual page 101

[LAN Configuration]
Dynamic IP address: The network environment has a DHCP server.
This option should only be enabled if you know which IP address the GV-IP Speed Dome
will get from the DHCP server, or you have obtained a domain name from the DDNS
service provider that always links to the unit's changing IP address.
Static IP address: Assign a static IP or fixed IP to the GV-IP Speed Dome. Type the
GV-IP Speed Dome's TCP/IP and DNS parameters in the "Configure connection
parameters" section below.
PPPoE: The network environment is xDSL connection. Type the Username and
Password provided by ISP to establish the connection.
If you use the xDSL connection with dynamic IP addresses, you must use the DDNS
function to obtain a domain name linking to the unit's changing IP address first.
[Configure connection parameters]
Type the GV-IP Speed Dome's IP address, Subnet Mask, Router/Gateway, Primary DNS
server and Secondary DNS server.
Parameters
IP address
Subnet Mask
Router/Gateway
Primary DNS server
Secondary DNS server
For details on Dynamic DNS Server Settings, see 5.6.2 Advanced TCP/IP.
Default
192.168.0.10
255.255.255.0
192.168.0.1
192.168.0.1
192.168.0.2
Configuration Menu
5
91