GeoVision GV-IP Speed User Manual page 132

Connecting to GV-IP Speed Dome
Depending on where you save the created E-Map file (GV-System, E-Map Server or Control
Center), the steps to open the Remote E-Map window for monitoring may vary slightly. The
following is the connection example when you store the E-Map file in the GV-System.
1. To enable the remote access to the GV-System, click the Network button, select
WebCam Server to display the Server Setup dialog box, and click OK to start the
WebCam server.
2. At the local computer, open the web browser and type the address of the GV-System. The
Single View page appears.
3. Select Emap. The valid user name and password are required for login. For the first-time
user, you will be directed to the Download page. Install the E-Map program before you can
run it.
4. On the Remote E-Map window, click the Login button and select the GV-IP Speed Dome
host to access its videos and I/O devices. The valid user name and password are required
to log in the GV-IP Speed Dome.
For details on the Remote E-Map functions, see "The Remote E-Map Window", Chapter 9,
DVR User's Manual on the Surveillance System Software DVD.
122