Trax Torque Specifications - Genie S-60 TraX Service Manual

December 2013

TRAX Torque Specifications

Sprocket to hub adapter fasteners
3
/ -10 nuts, GR 8, dry
4
3
/ -10 nuts, GR 8, lubricated
4
1
/ -13 FHS screws, dry
2
1
/ -13 FHS screws, lubricated
2
Hub adapter to drive hub fasteners
Lug nut torque, dry
Lug nut torque, lubricated
Sprocket bearing hub fasteners
1-14 bolts, GR 8, dry
1-14 bolts, GR 8, lubricated
Idler and bogey wheel fasteners
3
/ -10 bolts, GR 8, dry
4
3
/ -10 bolts, GR 8, lubricated
4
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
Part No. 147753
317 ft-lbs
430 Nm
281 ft-lbs
381 Nm
80 ft-lbs
108 Nm
60 ft-lbs
81 Nm
240 ft-lbs
325 Nm
180 ft-lbs
244 Nm
650 ft-lbs
881 Nm
488 ft-lbs
662 Nm
375 ft-lbs
508 Nm
281 ft-lbs
381 Nm
S-60 • S-65 • S-60 TRAX • S-65 TRAX
S-60 HC • S-60X • S-60XC
Section 2 • Specifications
SPECIFICATIONS
2 - 13