Related Manuals for Genie S Series
Summary of Contents for Genie S Series
- Page 1 Operator's Manual Supplement Panel Cradle and Z Booms ® ® AUS / CE / UK Models Original Instructions First Edition Third Printing Part No. 82518GT...
- Page 2 Grantham NG31 6BH Copyright © 2009 by Terex Corporation First Edition: Third Printing, August 2021 Genie, "S" and "Z" are registered trademarks of Terex South Dakota, Inc. in the U.S.A. and many other countries. These machines comply with AS 1418.10...
- Page 3 Serial Number Model These instructions constitute authorization to Z-45/22 from SN Z45-00001 modify a Genie Boom listed below by attaching Z-45/22 Not approved for models hardware to the platform rails for the purpose of before SN 4593-3613 lifting solid panels, provided the criteria herein is Z-45/25 RT strictly adhered to.
-
Page 4: Observe And Obey
Operator's Manual Supplement First Edition • Third Printing Introduction Observe and Obey: Panel Cradle Installation: Install hook piece (Genie part number Do not exceed the rated platform capacity. 228849GT) through the slots in the panel Combined weight of cradles, panels, cradle base (Genie part number 228848GT). - Page 5 Install rubber bumper (Genie part number Install the Platform Padding: 56934GT) through the panel cradle base and 12 Install the 2 pieces of padding (Genie part the hook piece in the location noted as "rubber number 88377-1400GT) on the platform rails.
- Page 6 Introduction Operating Instructions: Install the Strap: Secure both panel cradles to the platform. 13 Install clamp (Genie part number 56424GT) around the vertical platform rail tube. Refer to Place the load so that it rests in both panel Illustration 2.
Need help?
Do you have a question about the S Series and is the answer not in the manual?
Questions and answers