Genie S-60 TraX Service Manual page 209

December 2013
Observe and Obey:
Troubleshooting and repair procedures shall be
completed by a person trained and qualified on
the repair of this machine.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Before Troubleshooting:
Read, understand and obey the safety rules and
operating instructions in the appropriate
operator's manual on your machine before
attempting any maintenance or repair procedure.
Be sure that all necessary tools and test
equipment are available and ready for use.
Part No. 147753
About This Section
There are two groups of schematics in this section.
Electrical Schematics
Hydraulic Schematics
General Repair Process
Malfunction
discovered
Return to
service
S-60 • S-65 • S-60 TRAX • S-65 TRAX
S-60 HC • S-60X • S-60XC
Section 6 • Schematics
Schematics
Electrocution/burn hazard. Contact
with electrically charged circuits
could result in death or serious
injury. Remove all rings, watches
and other jewelry.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to squirt
or spray.
Identify
symptoms
problem
still exists
Inspect
and test
problem
solved
Troubleshoot
Perform
repair
6 - 1