Manifold Component Specifications; Machine Torque Specifications - Genie Z-34/22IC Service Manual

July 2007
REV A
Manifold Component
Specifications
Plug torque
SAE No. 2
SAE No. 4
SAE No. 6
SAE No. 8
SAE No. 10
SAE No. 12
Valve Coil Resistance
Note: The following coil resistance specifications are at
an ambient temperature of 68°F / 20°C. As valve coil
resistance is sensitive to changes in air temperature,
the coil resistance will typically increase or decrease by
4% for each 18°F / 20°C that your air temperature
increases or decreases from 68°F / 20°C.
Valve coil specifications
2 position 3 way solenoid valve, 10V DC
(schematic items L, M, N, O, P, Q, R, S, T, U,
AA, AB, BA and BB)
3 position 4 way solenoid valve, 10V DC
(schematic item E, CH, CI)
Proportional solenoid valve, 12V DC
(schematic item D)
Part No. 128267

Machine Torque Specifications

Platform rotator
3
/ -10 center bolt, GR 8 (dry)
4
36 in-lbs / 4 Nm
3
/ -10 center bolt, GR 8 (lubricated)
4
10 ft-lbs / 13 Nm
3
/ -16 bolts, GR 8 (dry)
8
14 ft-lbs / 19 Nm
3
/ -16 bolts, GR 8 (lubricated)
38 ft-lbs / 51 Nm
8
41 ft-lbs / 55 Nm
Turntable rotate assembly
56 ft-lbs / 76 Nm
Rotate bearing mounting bolts, lubricated
Rotate bearing motor
mounting bolts, lubricated
Drive motor and hubs
Drive hub mounting bolts, lubricated
Drive motor mounting bolts, lubricated
3
/ -16, GR 5
6Ω
8
7
/ -14, GR 5
16
6Ω
5Ω
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice.
Z-34/22 IC
Section 2 • Specifications
SPECIFICATIONS
380 ft-lbs
515 Nm
280 ft-lbs
379 Nm
44 ft-lbs
60 Nm
33 ft-lbs
45 Nm
180 ft-lbs
244 Nm
93 ft-lbs
126 Nm
180 ft-lbs
244 Nm
23 ft-lbs
31 Nm
37 ft-lbs
50 Nm
2 - 5