Genie S-60 TraX Service Manual page 187

December 2013
Error Source
ID Name
54 Drive Brake
Valve
55 High Drive
Motor Speed
Valve
56 Platform Level Value
57 Foot switch/ECU
Power Crosscheck
61 Steer Joystick
62 Steer
Directional
Valve
Part No. 147753
Error Type
ID Name
21 Fault
21 Fault
21 Fault
12 Value too high
15 Value too low
11 Value at 5V
12 Value too high
15 Value too low
16 Value at 0V
17 Not calibrated
21 Fault
S-60 • S-65 • S-60 TRAX • S-65 TRAX
S-60 HC • S-60X • S-60XC
Control System Fault Codes
Condition
Drive frozen
at zero and
neutral.
Alarm sounds
indicating a fault.
Motor speed
in the low state.
Alarm sounds
indicating a fault.
Direction frozen at
zero and neutral, AB
Direction frozen at
zero and neutral, AB
Limited speed
and direction.
Frozen at zero
and neutral.
Alarm sounds
indicating a fault.
Limited speed
and direction.
Frozen at zero
and neutral.
Alarm sounds
indicating a fault.
Section 5 • Fault Codes
Solution
Cycle power off,
then on after
problem has been
corrected.
Cycle power off,
then on after
problem has been
corrected.
Power up controller with
problem corrected
Power up controller with
problem corrected
Cycle power off,
then on after
problem has been
corrected.
Calibrate joystick.
Cycle power off,
then on after
problem has been
corrected.
5 - 7