Manifold Component Specifications - Genie S-60 TraX Service Manual

Section 2 • Specifications
SPECIFICATIONS
Auxiliary pump
Type:
Displacement
Function manifold
System relief valve pressure
Steer flow regulator
Jib boom / platform rotate
flow regulator
Oscillate relief valve pressure (@ 2500 rpm) 800 psi
Drive manifold
Hot oil relief valve pressure
Drive motors, 4WD models
Displacement per revolution,
high speed
Displacement per revolution,
low speed
Drive motors, 2WD models
Displacement per revolution,
high speed
Displacement per revolution,
low speed
Hydraulic filters
High pressure filter
High pressure filter
bypass pressure
Medium pressure filter
Medium pressure filter
bypass pressure
Hydraulic return filter
2 - 4
gear, fixed displacement
1.75 gpm
2.8 L/min
3000 psi
207 bar
3.5 gpm
13.2 L/min
0.6 gpm
2.27 L/min
55 bar
280 psi
19.3 bar
0.79 cu in
13 cc
1.83 cu in
30 cc
1.28 cu in
20.9 cc
2.14 cu in
35 cc
≥ 200
Beta
3
51 psi
3.5 bar
≥ 200
Beta
3
51 psi
3.5 bar
10 micron with
25 psi / 1.7 bar bypass
S-60 • S-65 • S-60 TRAX • S-65 TRAX
S-60 HC • S-60X • S-60XC
Manifold Component
Specifications
Plug torque
SAE No. 2
SAE No. 4
SAE No. 6
SAE No. 8
SAE No. 10
SAE No. 12
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
December 2013
36 in-lbs / 4 Nm
10 ft-lbs / 13 Nm
14 ft-lbs / 19 Nm
38 ft-lbs / 51 Nm
41 ft-lbs / 55 Nm
56 ft-lbs / 76 Nm
Part No. 147753