Machine Torque Specifications; Hydraulic Hose And Fitting Torque Specifications - Genie S-105 Service Manual

June 2011
REV E

Machine Torque Specifications

Platform rotator
1-8 center bolt, GR 5, dry
1-8 center bolt, GR 5, lubricated
3
/ -16 bolts, GR 8, lubricated
8
*use blue thread-locking compound
Turntable rotate assembly
Rotate bearing mounting bolts, lubricated
Rotate drive hub mounting bolts, dry
Rotate drive hub mounting bolts, lubricated 280 ft-lbs*
*use blue thread-locking compound
Rotate drive motor mounting bolts, dry
Rotate drive motor mounting bolts, lubricated
Drive motor and hubs
Drive hub mounting bolts, dry
Drive hub mounting bolts, lubricated
Drive motor mounting bolts, dry
Drive motor mounting bolts, lubricated
Drive hub oil plug, O-ring seal
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
Part No. 102916
Hydraulic Hose and Fitting
Torque Specifications
Your machine is equipped with Parker Seal-Lok
640 ft-lbs
fittings and hose ends. Genie specifications require
868 Nm
that fittings and hose ends be torqued to
specification when they are removed and installed
480 ft-lbs
or when new hoses or fittings are installed.
651 Nm
35 ft-lbs*
47.5 Nm
SAE Dash size
180 ft-lbs
244 Nm
380 ft-lbs
515 Nm
-10
380 Nm
-12
110 ft-lbs
-16
149 Nm
-20
80 ft-lbs
108 Nm
-24
269 ft-lbs
365 Nm
202 ft-lbs
274 Nm
SAE Dash size
110 ft-lbs
149 Nm
80 ft-lbs
108 Nm
13 ft-lbs
-10
18 Nm
-12
-16
-20
-24
S-100 • S-105 • S-120 • S-125
Section 2 • Specifications
SAE O-ring Boss Port
(tube fitting - installed into Aluminum)
-4
-6
-8
SAE O-ring Boss Port
(tube fitting - installed into Steel)
-4
-6
-8
SPECIFICATIONS
®
Torque
14 ft-lbs / 18.9 Nm
23 ft-lbs / 31.2 Nm
36 ft-lbs / 48.8 Nm
62 ft-lbs / 84.1 Nm
84 ft-lbs / 113.9 Nm
125 ft-lbs / 169.5 Nm
151 ft-lbs / 204.7 Nm
184 ft-lbs / 250 Nm
Torque
15 ft-lbs / 20.3 Nm
35 ft-lbs / 47.5 Nm
60 ft-lbs / 81.3 Nm
100 ft-lbs / 135.6 Nm
135 ft-lbs / 183 Nm
200 ft-lbs / 271 Nm
250 ft-lbs / 334 Nm
305 ft-lbs / 414 Nm
2 - 21