Vsg Adjustment Result - Ricoh M065 Service Manual

Vsg Adjustment Result

SP3-325-001 to -010 (Vsg Adjustment Result)
No. Result Description
Vsg adjustment
1 O.K
is correctly done.
ID sensor Vsg cannot be
2 adjustment adjusted within
error 4.0 ±0.5V.
ID sensor output
is more than
ID sensor
3 "Voffset
output error
Threshold"
(SP3-324-004)
Vsg Vsg adjustment
9 Adjustment has not been
error completed.
SM Appendix
Possible Causes/Action
-
Dirty ID sensor (toner, dust, or foreign
material)
Dirty transfer belt
Scratched image transfer belt
Defective ID sensor
Poor connection
Defective IOB
1. Clean the ID sensor.
2. Check the belt cleaning. Clean or replace the
transfer belt.
3. Replace the image transfer belt.
4. Replace the ID sensor.
5. Check the connection.
6. Replace the IOB board.
Defective ID sensor
Poor connection
Defective IOB
1. Replace the ID sensor.
2. Check the connection.
3. Replace the IOB board.
Other cases
Retry SP3-321-010.
4-5
Process Control Results
M065/M066