8. Configuring the Machine Using Utilities
Configuring the System Settings
Click [System Settings] to display the page for configuring the system settings.
This page contains the following tabs: [Sound Volume Adjustment], [Tray Paper Settings], [Copier],
[Fax], [Priority Tray], [Toner Management], and [Interface].
Sound Volume Adjustment Tab
Sound Volume Adjustment
Item
Panel Key Sound
Ring Volume
On Hook Mode
Job End Tone
Job Error Tone
Alarm Volume
Tray Paper Settings Tab
Tray 1
Item
Paper Size
264
Select the volume of the beep that sounds when a key is pressed from [Off],
[Low], [Middle], or [High].
Select the volume of the ring when a call is received from [Off], [Low],
[Middle], or [High].
Select the volume of the sound from the speaker during on hook mode from
[Off], [Low], [Middle], or [High].
Select the volume of the beep that sounds when a job is complete from
[Off], [Low], [Middle], or [High].
Select the volume of the beep that sounds when a fax transmission error
occurs from [Off], [Low], [Middle], or [High].
Select the volume of the alarm that sounds when an operation error occurs
from [Off], [Low], [Middle], or [High].
Description
Select the paper size for Tray 1 from the following:
A4, B5 JIS, A5 (148 × 210 mm), A5 (210 × 148 mm), B6 JIS, A6, 8 1/2
× 14, 8 1/2 × 11, 8 1/2 × 5 1/2, 8.5 × 13, 16K (195 × 267 mm), 8.5 ×
13.4, 8.5 × 13.6, 8.11 × 13.3, Custom Size
Description