Ricoh M065 Service Manual page 626

System Service Mode
025 Job End Area Coefficient
026 Job End Vb Coefficient
027 Job End Length
028 Job End Supply
029 TnCnmp: IntvlThsh
030 TnCnmp: Counter:Bk
031 TnCnmp: Counter:FC
032 TnCnmp: IntvlThsh2
[Blade Damage Prevention]
Adjusts the threshold temperature for preventing the cleaning blade in the
3517
transfer belt cleaning unit from being damaged. If the temperature is above this
value, toner is applied to the transfer belt at set intervals during the job to
prevent the blade from flipping over.
001 Execution Temp. Thresh
3518 [Image Adj. Execution Flag] DFU
001 Toner End Recovery: Bk
002 Toner End Recovery: C
003 Toner End Recovery: M
004 Toner End Recovery: Y
005 Vsg Adjustment
006 Developer Agitation
007 Process Control
008 MUSIC
M065/M066
*ENG
[0.1 to 25.5 / 1 / 0.1/step]
*ENG [0 to 100 / 40 / 1%/step]
*ENG [0 to 56 / 28 / 1mm/step]
[0 to 1 / 0.45 / 0.001
*ENG
mg/cm
*ENG
*ENG [0 to 1000 / 0 / 1 page/step]
*ENG
*ENG [0 to 255 / 4 / 1 page/step]
*ENG
[0 to 50 / 0 / 1 deg/step]
*ENG
*ENG
*ENG
[0 or 1 / 0 / 1/step]
0: OFF. 1: ON
*ENG
*ENG
*ENG
*ENG
[0 to 2 / 0 / 1/step]
0: OFF. 1: ON (once), 2: ON (twice)
*ENG
8-216
2
/step]
SM Appendix