Ricoh M065 Service Manual page 478

System Service Mode
2316 [Power ON:Bias] DFU
Image Transfer
001
Adjusts the bias of the image transfer roller at power-on or a closed cover.
[Paper Transfer Roller CL: Bias] DFU
2326
Paper Transfer Roller Cleaning: Bias Adjustment
Positive:before and
after JOB
001
Adjusts the positive voltage of the paper transfer roller for cleaning the paper
transfer roller.
Negative:before and
after JOB
002
Adjusts the negative current of the paper transfer roller for cleaning the paper
transfer roller.
Positive:after JAM
003
Adjusts the negative current limit of the paper transfer roller for cleaning the
paper transfer roller.
004 Negative:after JAM
[Common: BW: Bias]
2351 Image Transfer Belt: B/W: Bias Adjustment
Standard: 260 mm/sec, Middle: 182 mm/sec, Low: 85 mm/sec
Image Transfer:Standard Speed
001
Adjusts the current for the image transfer belt in B/W mode for plain paper.
Image Transfer:Middle Speed
002
Adjusts the current for the image transfer belt in B/W mode for M-Thick paper.
Image Transfer:Low Speed
003
Adjusts the current for the image transfer belt in B/W mode for thick 1 paper.
M065/M066
*ENG
[0 to 80 / 5 / 1
*ENG [0 to 2100 / 1000 / 10 V /step]
*ENG
[10 to 995 / 100 / 10 %/step]
*ENG [0 to 2100 / 2000 / 10 V/step]
*ENG [10 to 995 / 100 / 10 %/step]
*ENG
*ENG
*ENG
8-68
A /step]
[0 to 80 / 26 / 1 A]
[0 to 80 / 17 / 1 A]
[0 to 80 / 7 / 1 A]
SM Appendix