Ricoh M065 Service Manual page 453

[ID Sensor Check Result]
Displays the minimum result 2 values of the ID sensor check.
2145
Front, Center, Rear: ID sensors for the automatic line position adjustment and
the process control
001 Minimum 2: Bk
002 Minimum 2: C
003 Minimum 2: M
004 Minimum 2: Y
005 Minimum 2: Front
006 Minimum 2: Center
007 Minimum 2: Rear
[Area Mag. Correction] LD Pulse Area Correction (Color, Area) FA
Adjusts the magnification for each area. The main scan (297 mm) is divided
into 13 areas. Area 1 is at the front side of the machine (left side of the image)
2150
and area 13 is at the rear side of the machine (right side of the image).
Decreasing a value makes the image shift to the left side on the print.
Increasing a value makes the image shift to the right side on the print.
1 pulse = 1/16 dot
027 Bk: LD1 Area0
028 Bk: LD1 Area1
029 Bk: LD1 Area2
030 Bk: LD1 Area3
031 Bk: LD1 Area4
032 Bk: LD1 Area5
033 Bk: LD1 Area6
034 Bk: LD1 Area7
SM Appendix
*ENG
*ENG
*ENG
*ENG [0 to 5.5 / 0 / 0.01V/step]
*ENG
*ENG
*ENG
*ENG [-255 to 255 / 0 / 1sub-dot/step]
*ENG [-255 to 255 / -233 / 1sub-dot/step]
*ENG [-255 to 255 / -193 / 1sub-dot/step]
*ENG
[-255 to 255 / 58 / 1sub-dot/step]
*ENG
*ENG
[-255 to 255 / 143 / 1sub-dot/step]
*ENG
*ENG [-255 to 255 / 47 / 1sub-dot/step]
8-43
System Service Mode
M065/M066