Sp5857-016 Create A File On Hdd To Store A Log; Sp5857-017 Create A File On Sd Card To Store A Log - Ricoh M065 Service Manual

Using the Debug Log

SP5857-016 Create a File on HDD to Store a Log

This SP creates a 32 MB file to store a log on the HDD. However, this is not a completely
empty file. The created file will hold the number "2225" as the SCS key number and other
non-volatile information. Even if this SP is not executed, a file is created on the HDD when
the first log is stored on the HDD (it takes some time to complete this operation). This
creates the possibility that the machine may be switched off and on before the log can be
created completely. If you execute this SP to create the log file beforehand, this will greatly
reduce the amount of time required to acquire the log information and save onto the HDD.
With the file already created on the HDD for the log file, the data only needs to be recorded.
A new log file does not need to be created. To create a new log file, do SP5857-011 to
delete the debug log data from the HDD. Then do SP5857-016.

SP5857-017 Create a File on SD Card to Store a Log

This SP creates a 4 MB file to store a log on an SD card. However, this is not a completely
empty file. The created file will hold the number "2225" as the SCS key number and other
non-volatile information. Even if this SP is not executed, a file is created on the SD card
when the first log is stored on the SD card (it takes some time to complete this operation).
This creates the possibility that the machine may be switched off and on before the log can
be created completely. If you execute this SP to create the log file beforehand, this will
greatly reduce the amount of time required to acquire the log information and save onto the
SD card. With the file already created on the SD card for the log file, the data only needs to
be recorded; a new log file does not require creation. To create a new log file, do
SP5857-012 to delete the debug log data from the SD card. Then do SP5857-017.
SM 5-21 M065/M066