Hvps: T1T2 Board; Hvps: Cb Board - Ricoh M065 Service Manual

Electrical Components

4.13.9 HVPS: T1T2 BOARD

1. Right cover ( p.4-4)
2. BCU with bracket (
3. HVPS: T1T2 board (

4.13.10 HVPS: CB BOARD

If the optional tray heater is installed in the machine, the HVPS: CB bracket may
be still hot. Wait until the HVPS: CB bracket cools before doing this procedure.
1. Rear cover ( p.4-5)
2. Right cover ( p.4-4)
3. Controller box (
4. Inner left lower cover (
5. Disconnect the connector.
M065/M066
p.4-145 "BCU")
x 6, x all)
p.4-143)
p.4-11)
4-148 SM