Ricoh M065 Service Manual page 627

009 Drum Phase Adj.
010 Charge AC Control
011 Blade Damage Prevention
012 Vsg Average Error
[Toner End Prohibition Setting]
3519
Enables or disables each adjustment at toner end.
001 Process Control
002 MUSIC
003 TC Adjustment
3520 [ITB Idle Rotation] DFU
001 Temperature: High
002 Temperature: Medium
003 Temperature: Low
004 Temp.: L: ON
005 to Adjusts the threshold temperature for entering the ITB idle rotation after the
011 process control.
005 Temp. Range Thresh:T2
006 Temp. Range Thresh:T1
SM Appendix
*ENG
[0 or 1 / 0 / 1/step]
*ENG
0: OFF. 1: ON
*ENG
[0 or 1 / 0 / 1/step]
Sets "1", when the following values
shows.
*ENG Vsg_reg_ave:
3.5 ≤ Vsg_reg_ave ≤ 4.5 or
Vsg_dif_ave:
0.0 ≤ Vsg_dif_ave ≤ 0.5
*ENG [0 or 1 / 1 / 1/step]
0: Permit (adjustment is done even toner
*ENG
end condition)
1: Forbid (adjustment is not done at toner
*ENG
end condition)
*ENG
Specifies the idle rotation times of
*ENG
the ITB after the process control.
*ENG
[0 or 3 / 1.9 / 1 revolution/step]
*ENG
*ENG
[20 or 30 / 25 / 1 deg/step]
*ENG
[0 or 15 / 15 / 1 deg/step]
8-217
System Service Mode
M065/M066