Ricoh M065 Service Manual page 317

Rev. 12/14/2011
No. Type
FGATE OFF error: C
237 D
See SC 230 for troubleshooting details.
No. Type
⇒
240 C LD error: K or C
⇒
241 C LD error: Y or M
The bridge board detects LDB error a few times consecutively when
LDB unit turns on after LDB initialization.
- -
1.
2.
3.
SM Appendix
Details (Symptom, Possible Cause, Troubleshooting Procedures)
The PFGATE ON signal still asserts within 5 seconds after
processing the image in normal job or MUSIC (line position
adjustment) for end position [C].
The PFGATE ON signal still asserts when the next job starts.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Worn-out LD
Disconnected or broken harness of the LD
Replace the harness of the LD.
Replace the laser unit.
Replace the bridge board.
3-7
SC Tables
M065/M066