Ricoh M065 Service Manual page 661

successfully, and the system is waiting for the certification update
request from the rescue GW URL.
The notification of the certification request has been received from the
14
rescue GW controller, and the certification is being stored.
The certification has been stored, and the GW URL is being notified of
15
the successful completion of this event.
The storing of the certification has failed, and the GW URL is being
16
notified of the failure of this event.
The certification update request has been received from the GW URL,
the GW URL was notified of the results of the update after it was
17
completed, but a certification error has been received, and the rescue
certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW URL
18
is being notified of the failure of the certification update.
CERT: Error
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
Request for certification update in progress. The current certification
1
has expired.
068 An SSL error notification has been issued. Issued after the certification
2
has expired.
Notification of shift from a common authentication to an individual
3
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
SM Appendix 8-251
System Service Mode
M065/M066