Observance Of Electrical Safety Standards - Ricoh M065 Service Manual

Observance of Electrical Safety Standards

1. The machine and its peripherals must be installed and maintained by a customer
service representative who has completed the training course on those models.
2. The NVRAM on the system control board has a lithium battery which can explode if
replaced incorrectly. Replace the NVRAM only with an identical one. The manufacturer
recommends replacing the entire NVRAM. Do not recharge or burn this battery. Used
NVRAM must be handled in accordance with local regulations.
Safety and Ecological Notes for Disposal
1. Do not incinerate toner bottles or used toner. Toner dust may ignite suddenly when
exposed to an open flame.
2. Dispose of used toner, developer, and organic photoconductors in accordance with
local regulations. (These are non-toxic supplies.)
3. Dispose of replaced parts in accordance with local regulations.
4. When keeping used lithium batteries in order to dispose of them later, do not put more
than 100 batteries per sealed box. Storing larger numbers or not sealing them apart
may lead to chemical reactions and heat build-up.
The danger of explosion exists if a battery of this type is incorrectly replaced.
Replace only with the same or an equivalent type recommended by the
manufacturer. Discard used batteries in accordance with the manufacturer's
instructions.