Ricoh M065 Service Manual page 477

Temperature:Threshold
Adjusts the threshold temperature for SLL. If detected temperature is less than
007
a value specified by this SP, SLL condition is determined regardless of
humidity.
[Paper Size Correction] DFU
2308
Adjusts the threshold value for the paper size correction.
001 Threshold 1
002 Threshold 2
003 Threshold 3
2311 [Non Image Area: Bias] DFU
001 Image Transfer
002 Paper Transfer
SM Appendix
*ENG [–5 to 30 / 5 / 1 deg/step]
[0 to 250 / 194 / 1 mm/step]
*ENG Threshold 1 ≤ paper:
Paper is detected as "S1" size.
[0 to 250 / 165 / 1 mm/step]
*ENG Threshold 2 ≤ paper ≤ Threshold 1:
Paper is detected as "S2" size.
[0 to 250 / 139 / 1 mm/step]
*ENG Threshold 3 ≤ paper ≤ Threshold 2:
Paper is detected as "S3" size.
Adjusts the bias of the image transfer belt
between images. This value is added to the
*ENG
value of the image transfer belt bias.
[10 to 250 / 100 / 5 %/step]
Adjusts the bias of the paper transfer roller
*ENG between images.
[0 to 230 / 0 / 1 - A/step]
8-67
System Service Mode
M065/M066