Ricoh M065 Service Manual page 676

System Service Mode
[Debug Save When]
These SPs select the content of the debugging information to be saved to the
5858
destination selected by SP5857-002.
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of
SC error codes.
001 Engine SC Error
002 Controller SC Error
003 Any SC Error
004 Jam
5859 [Debug Save Key No.]
001 Key 1
002 Key 2
003 Key 3
004 Key 4
005 Key 5
006 Key 6
007 Key 7
008 Key 8
M065/M066
*CTL -
Turns on/off the debug save for SC codes
generated by printer engine errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
Turns on/off the debug save for SC codes
generated by GW controller errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
[0 to 65535 / 0 / 1 /step]
Turns on/off the debug save for jam errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
*CTL -
These SPs allow you to set up to 10 keys for log
files for functions that use common memory on
the controller board.
[–9999999 to 9999999 / 0 / – ]
8-266 SM Appendix