Ricoh M065 Service Manual page 490

System Service Mode
[Plain: Switch Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2422
plate at the paper leading edge between the erase margin area and the image
area.
Normal: 260 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Normal: 1st
006 Separation DC: Normal: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
[Plain: T-Edge Correction] DFU
Plain Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2403 and SP2407 are multiplied by these
2423
SP values.
Normal: 260 mm/sec, Low: 85 mm/sec
The paper trailing edge area can be adjusted with SP2424.
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Normal: 1st
006 Separation DC: Normal: 2nd
M065/M066
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 995 / 100 / 5 %/step]
*ENG
*ENG
*ENG
8-80 SM Appendix