Ricoh M065 Service Manual page 568

System Service Mode
[SP 2: SW Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2822
plate at the paper leading edge between the erase margin area and the image
area.
Middle: 182 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Middle: 1st
002 Paper Transfer: Middle: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Middle: 1st
006 Separation DC: Middle: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
[SP 2: T-Edge Correct] DFU
Special 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2823
edge in each mode. SP2803 and SP2807 are multiplied by these SP values.
Middle: 182 mm/sec, Low: 85 mm/sec
The paper trailing edge area can be adjusted with SP2824.
001 Paper Transfer: Middle: 1st
002 Paper Transfer: Middle: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Middle: 1st
M065/M066
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG [0 to 995 / 100 / 5%/step]
*ENG
*ENG
8-158 SM Appendix