Ricoh M065 Service Manual page 650

System Service Mode
004 Attack Max Num
[User Authentication]
These settings should be done with the System Administrator.
5420
Note: These functions are enabled only after the user access feature has
been enabled.
041 Printer
051 SDK1
061 SDK2
071 SDK3
[Authentication Error Code]
5481
These SP codes determine how the authentication failures are displayed.
001 System Log Disp
M065/M066
Sets a limit on the number of requests
received for certification in order to slow
down the certification speed when an
*CTL
excessive number of access attempts
have been detected.
[50 to 200 / 200 /1 attempt]
Determines whether certification is
required before a user can use the printer
*CTL applications.
[0 to 1 / 0 / 1]
0: On, 1: Off
[0 or 1 / 0 / 1] 0: ON. 1: OFF
Determines whether certification is
*CTL
required before a user can use the SDK
application.
Determines whether an error code
appears in the system log after a user
*CTL authentication failure occurs.
[0 to 1 / 0 / 1]
0: Off, 1: On
8-240 SM Appendix