Ricoh M065 Service Manual page 475

Gestetner, lanier, savin
Table of Contents

Advertisement

2199
[Music Time Setting] DFU
001 Error Time Set
[Skew Origin Set]
2220
Resets the value of the skew adjustment motor for each color.
These SPs must be executed when a new laser optics housing unit is installed.
001 C:Skew Motor
002 M:Skew Motor
003 Y:Skew Motor
[Dev. DC Bias:Fixed] DFU
Development DC Bias Adjustment
Adjusts the development bias.
Development bias is automatically adjusted during process control; therefore,
2229
adjusting these settings has no effect while Process Control (SP3-041-001
Default: ON) is activated.
After deactivating Process Control with SP3-041-001, the values in these SP
modes are used for printing.
001 Bk
002 C
003 M
004 Y
SM Appendix
*ENG
[0.1 to 9.9 / 3 / 0.1 sec /step]
*ENG
*ENG
-
*ENG
*ENG
*ENG
[0 to 800 / 450 / 1 –V/step]
*ENG
*ENG
8-65
System Service Mode
M065/M066

Advertisement

Table of Contents
loading

Table of Contents