When Installing The Image Transfer Belt - Ricoh M065 Service Manual

Image Transfer

When Installing the Image Transfer Belt

The image transfer belt does not have any directional characteristics. When
installing the image transfer belt, it is not required to install the image transfer belt
in a specific orientation.
1. Lubricate a part of the surface of the image transfer belt [A] with yellow toner, and then
turn the image transfer belt to the position [B] as shown above.
Be sure to use yellow toner from the M065/M066; do not use lubricant powder,
developer, or waste toner.
2. Install the ITB cleaning unit [A], and then collect the yellow toner by turning the image
transfer belt [B].
M065/M066 4-44 SM