Ricoh M065 Service Manual page 592

Gestetner, lanier, savin

Table of Contents

System Service Mode

[Toner End Detection: Set]

Enables/disables the toner alert display on the LCD.

[Toner End/Near End]

Displays the amount of each color toner. DFU

001 Toner Replenishment: Bk

002 Toner Replenishment: C

003 Toner Replenishment: M

004 Toner Replenishment: Y

005-008 Displays the consumed amount of each color toner.

005 Toner Consumption: Bk

006 Toner Consumption: C

007 Toner Consumption: M

008 Toner Consumption: Y

Displays the remaining amount of each color toner. These are calculated by

the operating times of the toner supply pumps.

009 Toner Remaining: Bk

010 Toner Remaining: C

011 Toner Remaining: M

012 Toner Remaining: Y

[0 or 1 / 0 / 1/step]

0: Detect, 1: Not Detect

[1 to 600 / 240 / 1 g/step]

[0 to 3000 / 0 / 0.001 g/step]

[–50000 to 600 / 0 / 0.001 g/step]

Chapters

Table of Contents