Ricoh M065 Service Manual page 761

1001 Bit Switch
005 Bit Switch 5
Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation
panel.
If enabled, users will be able to configure a Collate Type, Staple Type, and
bit 0
Punch Type from the operation panel. The available Types will depend on
the device and configured options.
After enabling this BitSw, the settings will appear under:
"User Tools > Printer Features > System"
bit 1 Multiple copies if a paper size or type
mismatch occurs
If a paper size or type mismatch occurs during the printing of multiple
copies, only a single copy is output by default. Using this BitSw, the device
can be configured to print all copies even if a paper mismatch occurs.
bit 2
Prevent SDK applications from altering
the contents of a job.
If this BitSw is enabled, SDK applications will not be able to alter print
data. This is achieved by preventing SDK applications from accessing a
module called the "GPS Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of
SDK applications on data.
bit 3 [PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
SM Appendix
0
0: Disable
0: Disable
(Single
copy)
0: Disable
0: Pattern3
8-351
Printer Service Mode
1
1: Enable
1: Enable
(Multiple copy)
1: Enable
1: Pattern1
M065/M066